Our high-Water Pressure Cleaning Services can freshen up sites and remove old dirt and grime that has been embedded for a long time. We bring all of our water blasting equipment to you no power or water needed from the site. We run our water pressure cleaning machine on a petrol engine. There are two different heads we use on the machine the roto clean wand and the hand wand. This includes fan and turbo head adapters.
Pressure washing or a power washing is used of high-pressure water spray to remove loose paint, grime, dust, mud from the surface such as buildings.
You can easily clean with just a power wash and water, for a better cleaning of the surface hot water and soap and pressure can be used.
The major difference is power washing machine uses heated water, where the pressure washer uses no heated water.
It is advised once in a year power wash needs to be get done in March and November.
The amount of time it takes to pressure wash a typical house ranges between 30 mins to 2 hours.
Pressure washer can damage the surface of the entire brick house if you’ll be using higher pressure.
We bring all of our water blasting equipment to you and there is n power required or water needed from the site.
These are the method of cleaning:
- Make sure the brick is wet with water
- Apply the cleaner to the bricks
- Scrub with a natural bristle brush
- Rinse well with warm water
For an effective concrete cleaning you can use a power washer with a PSI of at least 3000PSI and a flow rate of at least 4 gallons per minute.
A pressure washer cannot get damaged by water or rain, but if the pressure washer is left outside in the rain can cause corrosion and can even damage the appliance.